Edimax Print Server Manual do Utilizador descarregar pdf (Página 102)

z The DHCP server startup, which determine if

the PrintSir will act as DHCP server. If this

item is set to Auto, the PrintSir will detect if

there is any other DHCP server on the network

when it boots up. If there is no DHCP server

on the network, then the PrintSir will

configure itself as DHCP server; otherwise it

will disable this function.

z DHCP setting is used to configure TCP/IP

parameters that will be assigned to a DHCP

client. If this item is set to Auto, the PrintSir

will determine all TCP/IP parameters

automatically; otherwise you will configure

the following parameters:

 Starting IP: specifies the starting IP address

for assigning to DHCP clients.

 IP range: specifies how many IP addresses

are available to DHCP clients.

 Net mask: gives the network mask.

 Gateway IP: gives the IP address of the

default gateway.

 DNS server: gives the IP address of the

domain name server.

102

1 2 ... 97 98 99 100 101 102 103 104 105 106 107 ... 110 111

Sem comentários

Edimax Print Server Manual do Utilizador Página 102