Edimax EW-7303APn v2 Guia de Instalação Página 1

EW-7303APn v2 Quick Installation Guide 11-2011 / v1.0

5. Wall Mount 6. Pole Mount 7. Secondary port with POE 8. Main port 9. SMA connector for external antenna

3.1.2 Hardware installation steps Step2: Pass through Ethernet cable from the hole, insert the cable to Secondary port. Note: RJ-45 8P8C Ethernet ca

3.2 Software Installation Step4: Install POE Injector DC: Insert adapter POE: This hole is linked to Secondary port of the Outdoor Router with RJ-45.

Step5: Complete the hardware installation as diagram at below Notes: Use Reset button on POE injector. Push continually the reset button of POE inje

4. Software configuration There are web based management and configuration functions allowing you to have the jobs done easily. The Outdoor Router is

4.1 Prepare your PC to configure the WLAN Broadband Router For OS of Microsoft Windows 2000/ XP: 1. Click the Start button and select Settings, then

2. Move mouse and double-click the right button on Network icon. The Network window will appear. Click Protocol tab from the Network window. 3. Chec

4.2 Connect to the WLAN Broadband Router Open a WEB browser, i.e. Microsoft Internet Explorer 6.1 SP1 or above, then enter 192.168.2.1 on the URL to c

If you select DHCP option, please click Next button to jump at Step2. b. Static Mode (fixed IP) If you select Static Mode (fixed IP), please fill i

c. PPPOE Connection If you select PPPOE, please fill in these fields on next page. Item Description User Name If you select the PPPoE suppo

Table of Contents 1.Terminology ... 4 2.Introducti

d. L2TP If you select L2TP, please fill in these fields on next page. Item Description L2TP Server IP Address Allow user to make a tunnel wit

Default Gateway Fill in the default gateway for WAN interface out going data packets. Operation Mode Keep Alive: Keep the L2TP connection all th

e. PPTP If you select PPTP, please fill in these fields on next page. Item Description Item Description PPTP Server IP Address Allow user to

Step 2: configure Wireless Settings There are three options (Disable, WEP, WPA-PSK/WPA2-PSK) for Wireless security connection. OPEN WEP

SHAREDWEP WPA-PSK

WPA2-PSK Item Description Network Mode Click to select wireless mode from pull down menu. Frequency (Channel) Select the wireless communi

4.3.2 Operation Mode a. Bridge: The Bridge mode allows that all Ethernet and wireless interfaces are bridged into a single bridge interface. b. Gate

c. Wireless ISP The Wireless ISP mode allows that the wireless interface is treated as WAN port, and the Ethernet ports are LAN ports.

.4.3.3 Internet Settings 4.3.3.1 LAN Item Description MAC Clone Take NIC MAC address of PC on LAN side as the MAC address of WAN interface.

IGMP Proxy Select enable or disable the IGMP proxy function from pull-down menu. UPNP Select enable or disable the UPnP protocol from pull-down

5.2 What is Wireless LAN? ... 61 5.3 What are ISM bands? ...

4.3.3.3 VPN Passthrough Item Description L2TP Passthrough Select enable or disable the L2TP pass-through function from pull-down menu. IPSe

4.3.4 Wireless Settings 4.3.4.1 Basic Item Description Wireless On/Off Click Wireless OFF button to turn off wireless RF radio. Click Wireles

AP Isolation Wireless network is similar to the virtual local area network. All of the Wireless client devices can access each other completely. Whe

4.3.4.2 Security a. Disable f you set Security Mode to “Disable”, the wireless data transmission will not include encryption to prevent from unauth

If you set Security Mode to “OPEN-WEP or SHARED-WEP`”, please fill in the related configurations at below. Item Description Default Key Spe

c. WPA-PSK/WPA2PSK If you set Security Mode to “WPAPSK or WPA2-PSK”, please fill in the related configurations at below. Item Description WPA

d. WPA-RADIUS Item Description WPA Algorithms Select TKIP or AES for WPA algorithms. Key Renewal Interval Please fill in a number for Gro

e.802.1X Item Description WEP Select Disable or Enable For WEP IP Address Enter the RADIUS Server’s IP Address provided by your ISP. Port

f. Access Policy Item Description Policy Select the Disabled, Allow or Reject of drop down menu choose wireless access control mode. This

4.3.4.3 WPS Item Description WPS Select Enable or Disable the Wi-Fi Protected Setup function. Then click Apply button to take effect function

1.Terminology 3DES Triple Data Encryption Standard AES Advanced Encryption Standard ANSI American National Standards Institute AP Access

4.3.5Administration 4.3.5.1 Management Item Description Username Fill in the user name for web management login control. Password Fill in

Item Description Dynamic DNS Provider Click the drop down menu to pick up the right DDNS provider you registered. Account Fill in the a

4.3.5.2 Qos Item Description Uplink Speed Input uplink Maximum upload speed Downlink Speed Input downlink Maximum upload speed Local IP Address

4.3.5.3 Upload Firmware Item Description Location Click the Browse button to select the new firmware image file on PC. And click the Apply b

4.3.5.4 Settings Management Item Description Export Button Click Export button to export the current configuration to your PC. Settings fil

4.3.6.5 Status This page shows the current status and some basic settings of the device, includes system info, Internet Configurations and Local Netwo

4.3.6.6 System Log This page is used to view system logs Item Description Refresh Click the Refresh button to refresh the log shown on the sc

4.4 Configuration Examples 4.4.1 Example one – PPPoE on the WAN Sales division of Company ABC likes to establish a WLAN network to support mobile comm

1. Configure the Operation Mode Configuration Open “Operation Mode Configuration ” page, select Gateway. Press “Apply” button to confirm the configu

2. Configure the WAN interface: Open “Wide Area Network (WAN) Settings” page, select PPPoE then enter the User Name “user123” and Password “password12

TKIP Temporal Key Integrity Protocol UPNP Universal Plug and Play VPN Virtual Private Network WDS Wireless Distribution System WEP

3. Configure the WLAN interface: Open “Basic Wireless Settings” page, enter the SSID ”Edimax”, Channel Number ”AutoSelect”. Press “Apply” button to co

4. Configure the LAN interface: Open “Local Area Network (LAN) settings” page, enter the IP Address “192.168.2.1”, Subnet Mask “255.255.255.0”. Enable

4.4.2 Example two – fixed IP on the WAN Company ABC likes to establish a WLAN network to support mobile communication on all employees’ Notebook PCs.

1. Configure the WAN interface: Open “Wide Area Network (WAN) Settings” page, select STATIC(fixed IP) then enter IP Address “10.10.10.10”, subnet mask

2. Configure the LAN interface: Open “Local Area Network (LAN) settings” page, enter the IP Address “192.168.2.1”, Subnet Mask “255.255.255.0”. Enable

3. Configure the WLAN interface: Open “Basic Wireless Settings” page, enter the SSID ” Edimax”, Channel Number ”AutoSelect”. Press “Apply” button to c

4.4.3 Example three –set WLAN to be WAN as WISP User Mr. ABC likes to configure this WLAN Broadband Router to be a WiFi client. In order to communicat

1. Configure the Operation Mode: Open “Operation Mode Configuration” page, select WISP, then click “Apply” button to confirm the configuration setting

2. Site Survey: Open “Site Survey” page under Wireless Settings, and select the AP “TestAP”. Press “Next” button to connect with the AP.

3. Wireless encryption setting: If the AP has encryption setting, it will pop out a window for you filling the encryption setting. Please fill up the

2.Introduction The EW-7303APn v2 is an affordable IEEE 802.11b/g /n specifications of outdoor AP/Range Extender solution; setting SOHO and enterprise

4. Station Link Status: After connection with AP, you can open “Access Point Status” page under Administration to check Link Status.

5. FREQUENTLY ASKED QUESTIONS (FAQ) 5.1 What and how to find my PC’s IP and MAC address? 5.1 What and how to find my PC’s IP and MAC address? IP addre

5.4 How does wireless networking work? The 802.11 standard define two modes: infrastructure mode and ad hoc mode. In infrastructure mode, the wireless

5.5 What is BSSID? A six-byte address is that distinguish a particular a particular access point from others. Also know as just SSID. Serve as a netwo

5.9 What is WEP? An option of IEEE 802.11 function is that offers frame transmission privacy similar to a wired network. The Wired Equivalent Privacy

5.11 What is RTS (Request to Send) Threshold? The RTS threshold is the packet size at which packet transmission is governed by the RTS/CTS transaction

5.14 What is SSID Broadcast? Broadcast of SSID is done in access points by the beacon. This announces your access point (including various bits of inf

5.18 What is Temporal Key Integrity Protocol (TKIP)? The Temporal Key Integrity Protocol, pronounced tee-kip, is part of the IEEE 802.11i encryption s

5.23 What is Maximum Transmission Unit (MTU) Size? Maximum Transmission Unit (MTU) indicates the network stack of any packet is larger than this value

5.29 What is WLAN Block Relay between Clients? An Infrastructure Basic Service Set is a BSS with a component called an Access Point (AP). The access p

2.3 front panel description LED Indicator State Description 1. PWR LED ON The WLAN Broadband Router is powered ON. Off The WLAN Br

. A GI is a period of time between symbol transmission that allows reflections (from multipath) from the previous data transmission to settle before t

2.4 rear panel description Interfaces Description SMA connector For external antenna. You can use the SMA connector to connect with 2.4GHz ex

3. Installation 3.1 Hardware Installation 3.1.1 Appearance and Interface Introduction Notes: The product shot is for reference only please refer to p