Edimax EW-7303HPn V2 Especificações descarregar pdf (Página 16)

2. Move mouse and double-click the right button on Network icon. The Network window will appear.

Click Protocol tab from the Network window.

3. Check the installed list of Network Protocol window. If TCP/IP is not installed, click the Add button

to install it; otherwise go to step 6.

4. Select Protocol in the Network Component Type dialog box and click Add button.

5. Select TCP/IP in Microsoft of Select Network Protocol dialog box then click OK button to install the

TCP/IP protocol, it may need the Microsoft Windows CD to complete the installation. Close and go

back to Network dialog box after the TCP/IP installation.

6. Select TCP/IP and click the properties button on the Network dialog box.

7. Select Specify an IP address and type in values as following example.

 IP Address: 192.168.2.1, any IP address within 192.168.2.1 to 192.168.2.254 is good to connect

the Wireless LAN Access Point. Don’t use 192.168.2.1

 IP Subnet Mask: 255.255.255.0

8. Click OK to complete the IP parameters setting.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 72 73

Sem comentários

Edimax EW-7303HPn V2 Especificações Página 16