Edimax EDIMAX FAST ETHERNET MFP SERVER VERSION: 2.0 Manual do Utilizador

FFaasstt EEtthheerrnneett MMFFPP SSeerrvveerr User’s Manual Version: 2.0 (August, 2006)

4 Print Server Mode: The MFP Server also supports LPR, IPP and RAW printing protocols, which enable users to share printing function of MFP or Printer

94 4. Set the printer queue name and the short description of the MFP or printer and click “Forward”. 5. In the following screen, please configur

95 6. Select the MFP or printer manufacturer and model and click “Forward”. 7. Please review the settings. If the settings are correct, click “Fi

96 8. To print a test page and apply all the settings, please click “Yes”. 9. If the test page is printed without problem, please click “Yes”. If

97 13.2.1 Enable MFP Server’s TCP/IP Support The default configuration of the MFP Server is with TCP/IP support enabled. You can configure the MFP Se

98 13.2.2.2 BOOTP If you have the BOOTP daemon, bootpd, running on your UNIX/LINUX system that is accessible by the MFP Server, you can use the BOOTP

99 Node ID: 0000B4010101 (this implies Ethernet address is 0000B4010101), IP address: 203.66.191.12 The entry for this MFP Server in the /etc/bootptab

100 13.2.4 Configure Remote LPD Printing on the Host The procedure you use to configure your Unix/Linux host(s) to allow printing to your network rem

101 3. Add an entry to the host’s /etc/printcap file, similar to the following: printer-name:\ :lp=:\ :rm=203.66.191.186:\ :rp=lpt1:\ :lf=/va

102 14. MFP Server Installation in MAC OS LPR Printing (Line Printer Remote technology) allows Macintosh computers to connect to MFPs or printers via

103 14.2 MAC 10.3.x To enable LPR Printing in Macintosh 10.3.x, please follow the procedures below. 1. In the Desktop, click “System Preferences”.

5 4. MFP Server Installation in Windows 2000/XP Before you start, you should have:  One computer with Windows 2000 SP4 above and Windows XP SP1 ab

104 3. From the “Print & Fax” screen, click “Set Up Printers…”. 4. Click “Add” to add the new MFP Server through TCP/IP.

105 5. Enter the “Printer Type”, “Printer Address” and “Queue Name” and select the “Printer Model” to setup the MFP Server. Click “Add” to continue.

106 6. The MFP Server is installed completely. You can see it in the “Printer List”. 7. You can print a file to check whether the MFP Server is in

107 15. Troubleshooting 1. This product is not found even after searching by the “MFP Manager”.  Check if the power adapter and the network cable ar

108 3. A user always connects the MFP Server.  Contact with the current user and ask the user to disconnect the device.  If the user forgets to d

109 6. When I use LPR, IPP or RAW printing, the printing jobs are not able to print to the MFP or printer.  Check if the MFP is “Idle” but not being

110 Appendix: MFP Server Compatibility List The compatibility information is the first released in August 2006. For the latest information, please con

111 Windows 2000 & XP No. Brand Name MFP Model Print Scan Fax Card Reader26. HP PhotoSmart 8230 3 N/A N/A 3 27. HP PhotoSmart 8250 3 N/A

112 Windows 2000 & XP No. Brand Name MFP Model Print Scan Fax Card Reader61. LEXMARK P6210 3 3 N/A 3 62. LEXMARK X3330 3 3 N/A N/A 63.

6 4.2 Software Installation Procedure Before you start, you should check your computer’s operating system. This program can be run only in Windows 20

7 3. The “MFP Server Utilities - InstallShield Wizard” is displayed, click "Next".

8 4. Click “Next” to install the MFP Server utilities in the default folder or click “Change” to specify the destination folder where you would like

9 5. The system starts installing the MFP Server Utilities. 6. The MFP Server is installing the MFP Server utilities. When you find the following s

10 7. The MFP Server is installing the MFP Server drivers. When you find the following screen, please click “Continue Anyway”. 8. The “MFP Server C

11 9. The MFP Server List will auto search the MFP Servers in the network. Select the MFP Server you wan to setup and click “Next” to continue. 10.

12 11. Set the “Alias Name” and the “MFP Server Description” to the MFP Server here. Click on “Next”. Note: You can give a description by filling “MFP

13 12. Please set the network settings for the MFP Server manually. By default, the network settings are as follows. IP Address: 192.168.2.2 Subnet Ma

COPYRIGHT Copyright ©2006/2007 by this company. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed,

14 13. The configurations are finished. Please click “Finish” to apply new settings. 14. Click “Finish” to complete the installation. Note: If the Wi

15 15. Choose if you want to run the “MFP Manager” utility automatically when Windows starts. It is recommended to enable the setting. 4.3 MFP Serv

16 4.4 Install the MFP Drivers/Utilities When the installation is completed, the “MFP Manager” will be popped up. It will automatically find the MFP

17 4.4.1 Never Install MFP Driver/Utilities Before the installation, please read the manual of the MFP. Some MFP requires users to install the driv

18 1. Select the MFP that you wan to install in the “MFP Server List” and click “Connect” button. 2. The Windows will detect the new hardware and p

19 3. After you have completed the MFP installation, you will see the MFP is added to the “Printers and Faxes” in Windows.

20 4.4.2 MFP Drivers/Utilities has been installed 1. To link the MFP drivers/utilities that you have installed to the MFP Server, please follow the

21 3. After the installation, a copy of the MFP will be added to the “Printers and Faxes” in Windows. Tip : The new copy of the MFP is linked to the

22 5. Using the MFP After you have installed the MFP thought the installation wizard , the MFP is now connected to your computer. You can start shari

23 5.1 Printing The MFP will be added to “Printers and Faxes” in the Windows after the MFP is installed. When you connect to the MFP by clicking “Conn

FCC COMPLIANCE STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device ma

24 5.2 Scanning Most of the MFP provides scan utility for users. You can scan pictures or documents through the utility. In Windows XP, user can also

25 5.3 Card Reader Accessing If the MFP supports card reader function, you can read the files in the plugged card reader through the MFP Server.

26 5.4 Faxing a File If the MFP supports fax function, you can fax files from your computer to the fax number you designated. An example: Fax through

27 3. The “Send Fax” screen is popped up, please configure the file and enter the fax number. Click “Send Fax” to fax the file.

28 6. MFP Manager 6.1 MFP Server List The “MFP Manager” can automatically find the MFP server in the network and show it in the MFP Server List. User

29 MFP Server List MFP Server List The “MFP Server List” will list all the MFP Servers within the network. You can find the information of the MFP S

30 his “Contact Information”, you can see it here. You can contact with the current user asking to disconnect the MFP. Refresh Refresh the “MFP Ser

31 6.2 My Favorite You can add the frequently use MFP Servers to “My Favorite” list. The MFP Server in the list will be added to the quick link list w

32 My Favorite List Disconnect Disconnect the selected MFP. Delete Delete the selected MFP Server from the “My Favorite List”. Auto Release whe

33 6.3 Auto Connect List To let the system connect the MFP server automatically when you want to print a document just like using traditional print s

Contents 1. Introduction ... 1 2. Product Package ...

34 2. The MFP Servers within the network will be displayed in the following screen. Select the MFP Server you would like to add to the list. 3. Sel

35 4. The setup is finished.

36 6.4 Quick Setup Right click on the MFP Server icon in the system tray you can see the MFP servers you have chosen to “My Favorite List”. You can di

37 Quick Setup Disconnect Disconnect the selected MFP. The “Disconnect” is available only for the current user. Information To check more informa

38 6.5 Option Settings 6.5.1 General Setting General Setting Run MFP Manager when Windows starts Execute the “MFP Manager” when Windows starts eve

39 6.5.2 Search for MFP Server If there is an MFP Server not in the same network as your computer, you can enter the IP Address of the MFP Server for

40 7. Server Configuration 7.1 Introduction This chapter introduces MFP Server’s system configuration utility in Windows environment. This utility pro

41 7.2 Search for All Available MFP Server Every time when you run the “Server Manager” configuration utility, click the “Search” icon on the to

42 7.3 Status of MFP Server Click “Status” icon on the tool bar, the status of the selected MFP Server will be showed on the right side of the w

43 7.4 Setup the MFP Server Click “Setup” icon on the tool bar, the setup items of the selected MFP Server will be showed on the right side of t

7.9 Report ... 49 8. Web Management ...

44 7.5 General Configuration Double click “General” icon and the General configuration window will pop-up. You can see basic MFP Server information

45 7.6 TCP/IP Configuration Double Click “TCP/IP” icon and the TCP/IP configuration window will pop-up. You can configure the MFP Server to get IP

46 IP Address Assignment: Click the “IP” button to enter the IP setting page. If you need the MFP Server to automatically get an IP from DHCP server

47 7.7 System Configuration Double Click “System” icon and the System configuration window will pop-up. In the System configuration page, you can

48 7.8 MFP Server Management Double Click “MFP Server Management” icon and the MFP Server configuration window will pop-up. You are able to manage t

49 7.9 Report Click “Report” icon on the tool bar, the Report window will pop up. The report lists basic information of all available MFP Servers

50 8. Web Management 8.1 Introduction MFP Server can be configured and managed by a Web browser. Through Local Area Network, or even Internet, adminis

51 8.2 Login You may use any Web Browser to review the status or configure the settings of the MFP Server. After entering the IP address of the MFP Se

52 8.3 Device Status 8.3.1 System Status System Information includes “Device Name”, “MFP Server Name”, “Model Type”, “Firmware Version”, “MAC Addre

53 8.3.2 Printer Status This page lists the information and the status of MFP or printer connected to the MFP Server port. The status of the MFP or

14. MFP Server Installation in MAC OS... 102 14.1 MAC 10.4.x ...

54 8.3.3 TCP/IP Status This page lists all TCP/IP settings of the MFP Server including “IP Address”, “Subnet Mask” and “Gateway”. It also can tell

55 8.4 Setup Wizard Note: You can configure the MFP Server from the Setup Wizard. To apply the changes, you have to click “Save Settings” in the menu

56 8.4.1.1 Advanced Settings Some advanced feature of the MFP Server can be set here. TCP/IP Printing: This MFP Server supports TCP/IP network pro

57 8.4.2 TCP/IP You can configure the MFP Server to get IP automatically from DHCP server or setup an static IP manually. If you need the MFP Serv

58 8.4.3 Save Settings After configuring the MFP Server, you have to click the “Save Settings” to save the settings and restart the system.

59 8.5 System Tools 8.5.1 Load Default You can use this page to restore the factory default settings. All of your previous setup will be reset.

60 8.5.2 Upgrade Firmware You can upgrade the latest firmware for this MFP Server in this page. Click “Browse” to select the firmware in your stor

61 9. LPR Printing LPR Printing (Line Printer Remote technology) allows users to connect to MFPs or printers via TCP/IP for printing sharing. The comp

62 4. Select “Local Printer attached to this computer” and click “Next”. 5. Choose “Create a new port” and “Standard TCP/IP Port”. Click “Next”.

63 6. Please make sure that the MFP Server and the MFP or Printer have turned on and connected to the network correctly before you continue. Click “N

1 1. Introduction Thank you for purchasing our MFP server. This MFP server allows your multi-functions, all-in-one printer (MFP) or printer to be shar

64 8. Select “Custom” and click “Settings”. When you finish the settings at step 9, click “Next” to continue. 9. Select “LPR” and enter “lpt1” in t

65 10. Click “Finish”. 11. Select a suitable printer manufacturer and the printer model and click “Next”. If your printer is not in the list, click

66 12. Choose to set the print as a default printer or not. Click “Next”. 13. You have added the network printer to the PC successfully. The informat

67 10. RAW Printing RAW Printing allows users to connect to MFPs or printers via TCP/IP for printing sharing. The computer with Windows 2000/XP/2003 o

68 4. Select “Local Printer attached to this computer” and click “Next”. 5. Choose “Create a new port” and “Standard TCP/IP Port”. Click “Next”.

69 6. Please make sure that the MFP Server and the MFP or Printer have turned on and connected to the network correctly before you continue. Click “N

70 8. Select “Custom” and click “Settings”. When you finish the settings at step 9, click “Next” to continue. 9. Select “RAW” and enter “lpt1” in t

71 10. Click “Finish”. 11. Select a suitable printer manufacturer and the printer model and click “Next”. If your printer is not in the list, click

72 12. Choose to set the print as a default printer or not. Click “Next”. 13. You have added the network printer to the PC successfully. The informat

73 11. IPP Printing 11.1 Introduction IPP (Internet Printing Protocol) Printing provides a convenient way of remote printing service by TCP/IP. The MF

2 2. Product Package This package contains the following components:  One MFP Server  One Power Adapter  One Quick Installation Guide  One CD-ROM

74 3. The “Add Printer Wizard” is displayed. Click “Next”. 4. Select “A network printer, or a printer attached to another computer”. Click “Next”.

75 5. Select “Connect to a printer on the Internet or on a home or office network” and enter the URL of MFP Server. The URL format is “http://IP:631/

76 6. Select a suitable printer manufacturer and the printer model and click “Next”. If your printer is not in the list, click “Have Disk…” to instal

77 8. You have added the network printer to the PC successfully. The information of the printer is displayed in the windows. Click “Finish”.

78 12. MFP Server Installation in Windows 98SE/Me/NT This MFP Server supports TCP/IP network protocol and IPP, RAW and LPR printing protocols, it can

79 12.1 Software Installation Procedure The following are the installation steps in Windows 98SE. To install MFP Server in Windows Me/NT, the procedu

80 3. The message is prompted to remind you that the MFP Server will only support print sharing function since the operation system of your computer

81 5. Click “Next” to install the MFP Server utilities in the default folder or click “Change” to specify the destination folder where you would like

82 7. The “Configuration” screen is displayed. If you want to configure the MFP Server, please click “”Next” directly. Or you can select “No, I will

83 9. Enter the “User Name” and “Password” of the MFP Server you have selected to login the MFP Server. The default “User Name” is “admin”; default “

3 3. MFP Server with Print Server This MFP Server supports dual functionalities: MFP Server Mode and Print Server Mode at the same time. Users can ch

84 11. The MFP Server will try to determine your network settings. If a DHCP Server is present, the MFP Server will automatically obtain the network s

85 12. Click “Finish” to apply the settings. 13. Click “Finish” to complete the installation.

86 12.2 Server Utilities After the installation is completed, there will be three utilities and a text file in the MFP Server’s Program folder. Netwo

87 12.3 Network Port Setup “Network Port Setup” Utility offers a very simple method to add or remove MFP Server’s printer port from the client’s compu

88 12.4 Add Printer After adding a “Network Port” of the MFP Server to your computer, you can follow the procedure described below to add printer to t

89 4. Select “Local printer” and click “Next”. 5. Select a suitable printer manufacturer and the printer model and click “Next”. If your printer is

90 6. Choose the suitable “Print Server Network Port” and click “Next”. 7. Please enter the new name for the printer or click “Next” to keep the de

91 8. Choose to print the test page or not. It is recommended to print a test page. Click “Finish”. 9. The drivers of the printer will be installed

92 13. UNIX/Linux System Network The MFP Server is available for TCP/IP printing by Unix/Linux LPD (Line Printer Daemon) protocol. This chapter explai

93 2. Click “New” to add the MFP or printer connected to the MFP Server. 3. Click “Forward”.