Edimax i-Watcher i-Watcher Pan/Tilt Internet IP Camera Especificações descarregar pdf (Página 18)

3-3 Network

The Network page allows you to modify the network settings of the wired Ethernet. The

default settings use DHCP to obtain an IP address automatically. In most of the home and

office network environment, there is a DHCP server running. In this situation, by using this

default settings, the IP CAM can work immediately in most of the time.

If the Ethernet cable is unplugged, the IP CAM will lose connection. But as soon as the

Ethernet cable is plugged in again, the IP CAM will obtain a new IP address immediately.

If the network environment does not support DHCP function, you will need to set the

network settings of the IP CAM manually. Please fill all the fields including “IP address”18,

“Subnet mask”, “Default gateway”18and “DNS server”18 to let the network work. All these

settings must be correct for your network environment, otherwise the IP CAM cannot work.

The default setting is “obtain an IP address automatically”.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 117 118

Sem comentários

Edimax i-Watcher i-Watcher Pan/Tilt Internet IP Camera Especificações Página 18