Edimax EW Guia de Instalação

EW-7238RPD Quick Installation Guide 11-2012 / v1.0

9 Note: After the system has restarted, if you do not see the congratulations screen in Step 11, then please skip straight to step 12. Typically, t

10 13. To connect to the extender’s Wi-Fi networks: 14. Select the SSID which you named your extender’s Wi-Fi network in Step

11 Windows: Mac: Note: The next section WPS Setup describes an alternative setup method to iQ Setup. If you already completed iQ Setup, it is not

12 Note: Please ensure the extender is ready (power LED ( ) on, not flashing) before activating WPS. If your wireless router/access point supports

13 Note: Please check the instructions for your wireless router/access point to confirm how long you need to hold down i

14 If you experience problems with your Wi-Fi extender you can reset the extender back to factory default settings. This resets all settings back to

15 Mac: Note: Please refer to the user manual for detailed guidance on using the browser based configuration interface.

16 If the extender’s 2.4GHz or 5GHz Wi-Fi is disconnected from its root network, your browser will forward to the page shown below: The status

17 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital d

18 EU Declaration of Conformity English: This equipment is in compliance with the essential requirements and other relevant provisions of Directive

1 Before you start using this product, please check if there is anything missing in the package, and contact your dealer to claim the missing item(s)

19 Declaration of Conformity We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the equipment described below complies wit

20 Notice According to GNU General Public License Version 2 This product includes software that is subject to the GNU General Public License version

21 intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this L

22 6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original lic

23

2 LED Color LED Status Description Signal Strength 5 GHz Amber On Excellent signal. Signal strength: 60 – 100%. Slow Flashing Good signal. Signal st

3 There are two ways you can quickly setup the Wi-Fi extender - using browser-based iQ Setup (steps 1 - 15 below) or using the WPS button (see WPS S

4 i. Plug one end of the Ethernet cable into the Wi-Fi extender’s Ethernet port. Plug the other end of the cable into your computer’s Ethernet port

5 4. iQ Setup will display all available 2.4GHz and 5GHz Wi-Fi networks, listed under “SSID”. Please select one or both root Wi-Fi networks that your

6 6. For each network you select, you can enter a “Device SSID” which is a name to identify the EW-7238RPD’s Wi-Fi network. If the root SSID require

7 “Cancel” – or select “No” from the drop down menu shown below, before you click “Next”. 8. Please wait while the Wi-Fi extender tests the connecti

8 Note: When assigning a static IP address to the wireless extender, you need to ensure that you assign an IP address in the same subnet as your netw